Description
Raspberry Pi Pico Board with the RP2040 Microcontroller

RP2040 Development Board
The brand new microcontroller designed and manufactured by Raspberry Pi RP2040. It embodies a dual-core Arm Cortex-M0+ processor with 264KB internal RAM. You can attach up to 16MB of off-chip Flash. On the board, there are a lot of programmable I/O ports and communication ports such as I2C and SPI. All of these features are packed in a very small board that can fit in every project. You can program it like an Arduino or you can write your code on a MicroPython text file and pass it to the Raspberry Pi Pico like a thumb drive.
Raspberry Pi Pico Board Pinout
Specifications
- 21 mm × 51 mm form factor
- RP2040 microcontroller chip designed by Raspberry Pi in the UK
- Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
- 264KB on-chip SRAM
- 2MB on-board QSPI Flash
- 26 multifunction GPIO pins, including 3 analogue inputs
- 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels
- 1 × USB 1.1 controller and PHY, with host and device support
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
- Supported input power 1.8–5.5V DC
- Operating temperature -20°C to +85°C
- Castellated module allows soldering direct to carrier boards
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
Reviews
There are no reviews yet.